RENTAL/SALES
| Sponge-Jet's Sponge Blasting System™ consists of the Feed Units, Recyclers and a variety of different Sponge Media designed to offer a dry, low dust, low rebound, reusable abrasive or non-abrasive surface preparation system. |
FEED UNITS
|
| Sponge-Jet Feed Units deliver Sponge Media to the surface. We design and manufacture Feed Units to meet the specific flow characteristics of Sponge Media. An actuator inside the blast pot stirs the Sponge Media to keep it flowing, while an auger at the base of the unit controls the amount of media fed into the air stream. A pneumatic control panel provides precise adjustment of blast pressure and media feed rate. |
RECYCLERS
|
Blasted media is collected and processed through either an electrically or pneumatically powered Recycler, which separates Sponge Media into three categories: oversized debris, reusable media, and fines (consisting of spent media and dust). Typically, between 60% and 90% of Sponge Media is reusable after each blast cycle.
|
|
Electric Media Recycler |
35-P Recycler |
B-VAC PRO 2
|
B-VAC PRO 2 |
|
Sponge-Jet's B-VAC PRO 2 is an integrated blast & vacuum recovery system. Using the vacuum to recover the media, the system will automatically recycle, convey the reusable media into a storage cyclone which in turn reloads the Feed Unit.
The system is comprised of our standard 400HP Feed Unit to deliver Sponge Media to the surface and an oversized Sponge-Jet Recycler, specifically gasketed to maintain vacuum integrity.
The High-Volume, Low Noise Vacuum includes a reverse air-cleaning H.E.P.A. filter.
The Cyclone Storage Silos separate the Sponge Media abrasives from the vacuum air stream. |
|
SensiCleanTM SC-40
SensiClean Video
|
